Yealink CP860 SERIES, Administrator'S Manual, Page: 430 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
404
Parameters Permitted Values Default
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Example:
account.1.anonymous_call_offcode = *73
Note:
It works only if the value of the parameter “account.X.send_anonymous_code” is set
to 0 (Off Code).
Web User Interface:
Account->Basic->Send Anonymous Code->Off Code
Phone User Interface:
Menu->Features->Anonymous->Line X->Off Code
To configure anonymous call via web user interface:
1.
Click on
Account
->
Basic
.
2.
Select the desired account from the pull-down list of
Account
.
3.
Select the desired value from the pull-down list of
Local Anonymous
.
4.
Select the desired value from the pull-down list of
Send Anonymous Code
.
5.
(Optional.) Enter the anonymous call on code in the
On Code
field.
6.
(Optional.) Enter the anonymous call off code in the
Off Code
field.
7.
Click
Confirm
to accept the change.
To configure the anonymous call via phone user interface:
1.
Press
Menu
->
Features
->
Anonymous
.
2.
Select the desired line and then press the
Enter
soft key.
3.
Press or , or the
Switch
soft key to select the desired value from the
Local
Anonymous
field.
4.
(Optional.) Press or , or the
Switch
soft key to select the desired value from the
Send Anony Code
field.
5.
(Optional.) Enter the anonymous call on code in the
On Code
field.
6.
(Optional.) Enter the anonymous call off code in the
Off Code
field.
7.
Press the
Save
soft key to accept the change.