Yealink CP860 SERIES, Administrator'S Manual

Page: 249 / 1126

Configuring Basic Features
223
Parameter Permitted Values Default
places a call, receives a call, is during a call, or is idle (if large DND icon is enabled).
0
-No Label
1
-2 chars
If it is set to 0 (No Label), you can press the line key to display the line key label when the
label length is shorten.
If it is set to 1 (2 chars), the exceeding characters will be ignored.
Note:
It is only applicable to SIP-T52S IP phones.
Web User Interface:
Dsskey->Line Key->Linekey length in short
Phone User Interface:
None
To configure the linekey length in short via web user interface:
1.
Click on
Dsskey
->
Line Key
.
2.
Select the desired value from the pull-down list of
Linekey Length in short
.
3.
Click
Confirm
to accept the change.
Account Registration
Registering an account makes it easier for the IP phones to receive an incoming call or dial an
outgoing call. Yealink IP phones support registering multiple accounts on a phone; each
account requires an extension or phone number.
The number of the registered accounts must meet the following:
Phone Model Accounts
SIP-T54S/T48G/T48S/T46G/T46S/T29G <=16
SIP-T52S/T42G/T42S <=12