Yealink CP860 SERIES, Administrator'S Manual

Page: 1008 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
982
Details of the Configuration Parameter:
Parameter Permitted Values Default
static.watch_dog.enable 0 or 1 1
Description
:
Enables or disables the Watch Dog feature.
0
-Disabled
1
-Enabled
If it is set to 1 (Enabled), the IP phone will reboot automatically when the system is broken
down.
Web User Interface:
Settings->Preference->Watch Dog
Phone User Interface:
None
To configure watch dog feature via web user interface:
1.
Click on
Settings
->
Preference
.
2.
Select the desired value from the pull-down list of
Watch Dog
.
3.
Click
Confirm
to accept the change.
Getting Information from Status Indicators
Status indicators may consist of the power LED, MESSAGE key LED, line key indicator, headset
key indicator and the on-screen icon.
The following shows two examples of obtaining the IP phone information from status indicators
on SIP-T46G IP phones:

If a LINK failure of the IP phone is detected, a prompting message “Network unavailable”
and the icon will appear on the LCD screen.

If a call is muted, the MUTE key LED illuminates.
For more information on the icons, refer to Appendix G: Reading Icons on page 1043 .