Yealink CP860 SERIES, Administrator'S Manual, Page: 112 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
86
Status
field.
3.
Enter the VLAN ID (1-4094) in the
VID Number
field.
4.
Enter the priority value (0-7) in the
Priority
field.
5.
Press the
Save
soft key to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6.
Click
OK
to reboot the phone.
DHCP VLAN
IP phones support VLAN discovery via DHCP. When the VLAN Discovery method is set to
DHCP, the IP phone will examine DHCP option for a valid VLAN ID. The predefined option 132
is used to supply the VLAN ID by default. You can customize the DHCP option used to request
the VLAN ID.
Procedure
DHCP VLAN can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure DHCP VLAN discovery
feature.
Parameters:
static.network.vlan.dhcp_enable
static.network.vlan.dhcp_option
Web User Interface
Configure DHCP VLAN discovery
feature.
Navigate to
:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load
Phone User Interface
Configure DHCP VLAN discovery
feature.
Details of Configuration Parameters:
Parameters Permitted Values Default
static.network.vlan.dhcp_enable 0 or 1 1
Description:
Enables or disables DHCP VLAN discovery feature on the IP phone.
0
-Disabled
1
-Enabled
Note:
If you change this parameter, the IP phone will reboot to make the change take