Yealink CP860 SERIES, Administrator'S Manual, Page: 333 / 1126

Configuring Basic Features
307
Parameters Permitted Values Default
0 to 12 (for SIP-T52S/T42G/T42S)
0 to 6 (for SIP-T41P/T41S/T27P/T27G)
0 to 3 (for SIP-T40P/T40G/T23P/T23G)
0 to 2 (for SIP-T21(P) E2)
Example:
dialplan.dialnow.line_id.1 = 1,2
Note:
Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P)
E2/CP860/CP920 IP phones. It works only if the values of the parameters
“dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Dial Now->Account
Phone User Interface:
None
phone_setting.dialnow_delay Integer from 0 to 14 1
Description:
Configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the IP phone will automatically
dial out the entered number after the designated delay time.
If it is set to 0, the IP phone will automatically dial out the entered number immediately.
Note
: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Features->General Information->Time Out for Dial Now Rule
Phone User Interface:
None
To create a dial now rule via web user interface:
1.
Click on
Settings
->
Dial Plan
->
Dial Now
.
2.
Enter the desired value in the
Rule
field.
3.
Enter the desired line ID in the
Account
field or leave it blank.