6
-50
Multi-function Analog Input (
H3-09)
Note The forward torque limit is the limit value when the analog input signal generates forward torque. This torque limit setting is enabled even when the
analog input signal generates forward torque while the motor is operating (regeneration).
Setting the Torque Limit in Constants
Using L7-01 to L7-04, you can set individually four torque limits in the following directions: Forward drive,
reverse drive, forward regeneration, and reverse regeneration.
Set the Torque Limit Value Using an Analog Input
You can change the analog input level torque limit value by setting the torque limit in multi-function analog
input terminals A2
.
The analog input terminal signal level is factory-set as follows:
Multi-function analog input terminal A2: 4 to 20 mA
The following diagram shows the relationship between the torque limits.
Fig 6.36 Torque Limit by Analog Input
Set-
ting
Value
Function
Contents (100%)
Control Methods
V/f
V/f
with
PG
Open
Loop
Vec-
tor
Flux
Vec-
tor
10
Positive torque limit
Motor's rated torque
No
No
Yes
Yes
11
Negative torque limit
Motor's rated torque
No
No
Yes
Yes
12
Regenerative torque limit
Motor's rated torque
No
No
Yes
Yes
15
Positive/negative torque limit
Motor's rated torque
No
No
Yes
Yes
H3-05,
and A3
Multi-function analog input terminal A3: 0 to 10
Negative
Reverse operation
Regenerative torque limit
Regenerative torque limit
Forward torque limit
Positive/negative torque limits
Positive/negative torque limits
No. of motor rotations
Forward operation
Negative torque limit
Positive
Output torque
