Yamaha CL3, Service Manual

Page: 132 / 401

CL3/CL1
132
●
CL3/CL1 Test Program
a. Use this Test Program to execute the service check for CL3/CL1.
Load the latest program shown in the following table into CL3/CL1 itself and PC before executing the service check.
For the updating procedure, refer to the “UPDATING FIRMWARE” section on page 164.
* The test program can be downloaded from the YSISS Home Page.
• CL_Updata
Generic term FILE name (“?” depends on version) Version Writing procedure [object]
MAIN FIRMWARE MCLP?_??.PGM V1.xx
CPU circuit board check/General
check [USB storage]
PC application for Service Check
¥TestProgram¥Service Test PC App
¥CLTest_service.exe
V1.0.0 [PC for checking]
DME-N Network Driver
¥TestProgram
¥DME-N Network Driver v1.2.2¥Setup.exe
V1.2.2 [PC for checking]
■
SERVICE CHECK PROGRAM
b. Use this test program with the OS: Windows 2000/XP/7.
Use the PC application for service check.
Immediately after start-up, the screen as sown in Fig. 1 appears.
Start-up screen (Fig. 1)
Click here to close the screen (to enter the tool bar)
Click here to end the program.
Click here to end this program (same as
the “X” button at the upper right of the screen) Used to select communication
port (Ethernet MIDI) Clicking this button makes check
screen (Fig. 2) displayed.