Welcome to the world of the AW2816
38
Chapter
2
Operation section
2
Use the [CURSOR] keys to move the cursor
within the character palette to the button
for the character you want to input, and
press the [ENTER] key.
The corresponding character/symbol/numeral
will be input, and the highlighted area in the text
input box will move to the right.
3
Use the same procedure to input the
remaining characters.
Tip!
• Instead of the
/
buttons, you can also use the
[DATA/JOG] dial to move the highlighted area left
or right.
• If you want to correct a character that you input by
mistake, use the
/
buttons or the [DATA/JOG]
dial to specify the location of that character, and use
the text palette to select a new character.
4
When you are finished inputting the name,
move the cursor to the OK button, and
press the [ENTER] key.
If you are saving a scene or library, the new name
will be confirmed at this stage, and the TITLE
EDIT popup window will close.
If you are creating a new song, the NAME EDIT
window will close, and a COMMENT EDIT win-
dow will appear, allowing you to assign a com-
ment to the song. Operations in this window are
the same as in the NAME EDIT window.
Tip!
• If you decide to cancel the operation, move the cur-
sor to the CANCEL button and press the [ENTER]
key. The name you input will be discarded, and the
previous screen will reappear.
• A scene or library can be given a name of up to 16
characters, and a song name and comment can be
up to 64 characters long.
Selecting a channel
In order to operate the mix parameters of a channel
on the AW2816, you must first select the channel that
you want to operate. Here’s how to select a channel.
1
Use the keys of the MIXING LAYER section
to select the mixing layer that you want to
operate.
In the AW2816, the controls for the monaural
channels in the top panel ([SEL] keys 1–8, [ON]
keys 1–8, faders 1–8) are shared between input
channels 1–8 and monitor channels 1–16. For
this reason, you must first select the mixing layer
(group of eight channels) that contains the chan-
nel you want to operate.
According to the key you select in the MIXING
LAYER section, the channels operated by the
fader section will change as follows.
Tip!
The [SEL] keys, [ON] keys, and faders (controls) of the
stereo output channel and return channels 1/2 are not
affected by operations of the MIXING LAYER section
keys.
2
If you want to operate the faders, use the
[HOME] key and [AUX 1]–[AUX 6] keys of
the FADER MODE section to select the
fader mode.
Faders 1–8 are used to adjust the input levels of
the currently selected mixing layer or the send
levels to AUX 1–6. To select the parameters that
will be controlled by faders 1–8, use the keys of
the FADER MODE section.
Input channels 1–8
Monitor channels 1–8
Monitor channels 9–16
Return channel 2
Return channel 1
Stereo output
channel
