manualshive.com logo in svg

Yamaha AW2816, Owner'S Manual

The Yamaha AW2816 is a powerful and versatile digital audio workstation designed for professional audio production. With its intuitive interface and advanced features, this all-in-one device offers exceptional recording, mixing, and mastering capabilities. Find the detailed Service Manual for the Yamaha AW2816 available for free download at manualshive.com.

Share
Download
background image

403

Appendix

Appendix

2.1.4 MIDI/HOST

Select whether the MIDI IN/OUT connectors of the TO 
HOST connector will be used for serial transmission.
(MTC output data will always be transmitted from the 
MTC OUT connector.)

2.1.5 OUT/THRU

Select whether the MIDI OUT/THRU connector will 
function as OUT or as THRU.
If THRU is selected, messages received at the MIDI IN 
connector will be re-transmitted without change from the 
MIDI OUT/THRU connector.
Regardless of the MIDI/HOST setting, the connector will 
function as a THRU connector if the THRU setting is 
selected. If you want to use the connector as MIDI OUT, 
the MIDI/HOST setting must be OUT.

2.1.6 TO HOST

If the TO HOST connector is selected, choose one of 
three settings depending on the type of computer that is 
connected.

2.1.7 MIDI Clock ON/OFF

Specify whether MIDI Clock will be used.
If this is ON, MIDI Clock will be transmitted from the 
connector selected by MIDI/HOST.

2.1.8 MTC ON/OFF

Select whether MTC will be used.
If this is ON, MTC will be transmitted from the connector 
selected by MIDI/HOST.
Regardless of this setting, MTC will always be transmitted 
from the MTC OUT connector.

2.2 Program change assign table

This table allows you to freely specify the correspon-
dence between Program Change No. and Scene No.
This table is used for conversion for both transmission 
and reception.

2.3 Control change assign table

This table allows you to freely specify the correspon-
dence between Control Change No. and Parameter 
name.

This table is used for conversion for both transmission 
and reception.

3. MIDI format list

3.1 CHANNEL MESSAGE

command

rx/tx

function

-----------------------+-----+-------------------------------------

8n NOTE OFF

rx

Control the internal effect

9n NOTE ON

rx

Control the internal effect

Bn CONTROL CHANGE rx/tx Edit parameters (use the Control 

Change Assign Table)

Cn

PROGRAM CHANGE rx/tx Switch scene memories (use the 

Control Change Assign Table)

3.2 SYSTEM COMMON MESSAGE

command

rx/tx

function

-----------------------+-----+-------------------------------------

F1

MIDI TIME CODE rx/tx MTC transmission (when MTC 

Master), MTC reception (when 
MTC slave)

F2

SONG POSITION POINTER tx

SPP reception (when MIDI Clock 
is used)

3.3 SYSTEM REAL TIME MESSAGE

command

rx/tx

function

-----------------------+-----+-------------------------------------

F8 TIMING CLOCK tx

MIDI Clock transmission (when 
MIDI Clock is used)

FA START

tx

Start command transmission 
(when MIDI Clock is used)

FB CONTINUE

tx

Continue command transmission 
(when MIDI Clock is used)

FC STOP

tx

Stop command transmit (when 
MIDI Clock is used)

FE ACTIVE SENSING rx

Check MIDI cable connections

FF RESET

rx

Clear running status

3.4 SYSTEM EXCLUSIVE MESSAGE
3.4.1 Real Time System Exclusive
3.4.1.1 MMC

command

rx/tx

function

-----------------------+-----+-------------------------------------

01 STOP

rx/tx Transport stop

02 PLAY

rx

Transport play

03 DEFERRED PLAY rx/tx

Transport play

04 FAST FOWARD rx/tx

Transport fast-forward

05 REWIND

rx/tx

Transport rewind

06

RECORD STROBE rx

Transport punch-in record

07 RECORD EXIT

rx

Transport punch-out

0F RESET

rx/tx

MMC reset

40 WRITE

rx

Write data field

44 LOCATE

rx/tx

Transport locate

3.4.2 Bulk Dump & Request

data

name

rx/tx

function

-----+-------+------------------------------------

'M'

rx/tx

Scene Memory & Request

'S'

rx/tx

Setup Memory & Request

'R'

rx/tx

Remote Memory & Request

'Q'

rx/tx

Equalizer Library & Request

'Y'

rx/tx

Dynamics Library & Request

'E'

rx/tx

Effect Library & Request

'T'

rx/tx

Patch Library & Request

'H'

rx/tx

Channel Library & Request

'A'

rx/tx

Automix Memory & Request

'P'

rx/tx

Program Change Assign Table & Request

'C'

rx/tx

Control Change Assign Table & Request

3.4.3 Parameter Change

Parameter

type

rx/tx

function

-----+-------+------------------------------------

0x00

rx/tx

edit buffer (byte operation format)

0x01

rx

system memory (byte operation format)

0x02

rx/tx

function call (mem/lib recall,mem/lib 

store)

0x10

rx/tx

edit buffer (7bit operation format)

0x40

rx/tx

edit buffer (bit operation format)

0x41

rx

system memory (bit operation format)

0x43

rx

controller (key remote) (bit opera-

tion format)

Summary of Contents for AW2816





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AW2816

Zenith H-100 Service Manual preview
H-100
Brand: Zenith Pages: 98
Cobalt Digital Inc HPF-9000 Product Manual preview
HPF-9000
Brand: Cobalt Digital Inc Pages: 54
adstec TabX ITC8113 Instruction Manual preview
TabX ITC8113
Brand: adstec Pages: 68
Nanoxia Deep Silence 6 Revision B User Manual preview
Deep Silence 6 Revision B
Brand: Nanoxia Pages: 24
C&T VCO-6000 User Manual preview
VCO-6000
Brand: C&T Pages: 99
IBASE Technology AMI400 Series User Manual preview
AMI400 Series
Brand: IBASE Technology Pages: 19
Acer Veriton VZ2594 User Manual preview
Veriton VZ2594
Brand: Acer Pages: 47
Vivo CART-V00LW Instruction Manual preview
CART-V00LW
Brand: Vivo Pages: 12
Asus Eee Top ET16 Series User Manual preview
Eee Top ET16 Series
Brand: Asus Pages: 34
Asus Eee Box EB1012 Specifications preview
Eee Box EB1012
Brand: Asus Pages: 3
Asus EB1501-B0167 User Manual preview
EB1501-B0167
Brand: Asus Pages: 46
Asus ED2AD User Manual preview
ED2AD
Brand: Asus Pages: 60
Asus E13176 User Manual preview
E13176
Brand: Asus Pages: 86
Asus EB1501P-B016E User Manual preview
EB1501P-B016E
Brand: Asus Pages: 50
Asus EB1020-B0020 User Manual preview
EB1020-B0020
Brand: Asus Pages: 40
Asus Eee Top ET2010 User Manual preview
Eee Top ET2010
Brand: Asus Pages: 38
Asus EB1007-B0200 User Manual preview
EB1007-B0200
Brand: Asus Pages: 46
Asus EB1012-B0016 User Manual preview
EB1012-B0016
Brand: Asus Pages: 95

Brands by name

Popular brands

Load more brands