manualshive.com logo in svg

Yamaha AW2816, Owner'S Manual, Page: 246 / 420

Share
Download
Yamaha AW2816 Owner'S Manual Download Page 246

244

Reference section

FILE screen

Backup page

Back up a song

Function

In this page, song data on the internal 
hard disk can be backed up on an inter-
nal/external CD-RW drive or SCSI 
device (e.g., MO drive).

Key operation

• [FILE] key 

→

 [F1] (Backup) key

• Repeatedly press the [FILE] key until 

the screen shown at the right appears.

Screen functions

A

Song list

This is a list of the songs saved on the internal hard 
disk. The song enclosed by the dotted line is cur-
rently selected. The highlighted line indicates the 
current song (currently loaded song).
In the BACKUP column, the “

●

” symbol indicates 

a song that has been selected for backup, and the 
“ ” symbol indicates a song that has been 
excluded from the backup.
The song list displays the following information.
• SONG NAME ...... Song name (however, only 

the first 12 characters)

• SAVED AT............ Date and time at which the 

song was last saved

• SIZE..................... Size of the song
• BIT/FS ................. Number of quantization bits/

sampling frequency of the 
song

• PRT...................... Write protect (

→

P.238) on/off 

status

B

BACKUP SONG button

This button switches the song currently selected in 
the song list between Selected for backup 
(ENABLE) or Excluded from the backup (DISABLE).
When you move the cursor to this button and 
press the [ENTER] key, the symbol in the BACKUP 
column (

●

 or  ) will alternate for the currently 

selected song.

C

ALL ENABLE button

If you move the cursor to this button and press the 
[ENTER] key, all songs will be selected for backup.

D

ALL DISABLE button

If you move the cursor to this button and press the 
[ENTER] key, all songs will be excluded from the 
backup.

E

SOURCE

This shows the backup source drive (internal hard 
disk). This item is for display only, and cannot be 
modified.

F

DESTINATION

This selects the backup destination drive. Move 
the cursor to this field and use the [DATA/JOG] 
dial to select a SCSI ID number (external SCSI 
device/external CD-RW drive) or “ATAPI” (internal 
CD-RW drive), and press the [ENTER] key to con-
firm your selection.

G

EXECUTE button

When you move the cursor to this button and 
press the [ENTER] key, a popup window will ask 
you to confirm the operation. Move the cursor to 
OK and press the [ENTER] key to begin the 
backup.

4

3

7

6

1

2

5

Summary of Contents for AW2816





































































































































































































































































































































































































































Reviews:

No comments