manualshive.com logo in svg

Yamaha AW2816, Owner'S Manual

The Yamaha AW2816 is a powerful and versatile digital audio workstation designed for professional audio production. With its intuitive interface and advanced features, this all-in-one device offers exceptional recording, mixing, and mastering capabilities. Find the detailed Service Manual for the Yamaha AW2816 available for free download at manualshive.com.

Share
Download
background image

389

Appendix

Appendix

• Is the input signal routed appropriately to the 

recorder? *

* If the signal is being input appropriately to the 

recorder, pressing the [REC TRACK SELECT] key will 
cause the meter to react.

* If the signal is being input appropriately to the 

recorder, pressing the [REC TRACK SELECT] key will 
cause the meter in the METER screen to react.

• When a file input/output page such as the SONG 

screen Song List page is displayed, recording and 
playback are not possible.

• CD/DAT DIGITAL REC in the UTILITY screen Pre-

fer.2 page may be set to DISABLE.

• Please read and understand the copyright warning 

(

→

P.174) before using digital input signals.

■

Can’t record on the STEREO track

• It is not possible to record on the STEREO track 

while recording on other tracks.

■

Can’t play back the STEREO track

• Muting may be selected in the TRACK screen Stereo 

page.

• Are monitor channels 1 and 2 raised? *

* For STEREO track playback mode, the signal is out-

put from monitor channels 1 and 2.

■

Not all tracks will play back

• There are limitations on the number of tracks that 

can be simultaneously recorded or played. Refer to 
Operation section “Audio tracks”.

■

The volume of a particular channel increases or 
decreases

• Are the dynamics processor settings appropriate?
• Automix may have been recorded.

■

Faders move to the lowest position on their own

• Automix may have been recorded.

■

Meters move even though the faders are lowered

• The direct out setting may be PRE EQ or PRE 

FADER.

• The meter display may be set to PRE FADER.

■

Can’t store a scene

• Is the scene memory protected?
• A scene cannot be stored in scene number 00.

■

Can’t reproduce a scene

• One or more channels may be set to Recall Safe.

■

Can’t recall a scene during recording

• The AW2816 may be set to record the digital input 

signal.

• Make sure that CD/DAT DIGITAL REC is set to 

ENABLE.

■

Can’t change input patches during recording

• The AW2816 may be set to record the digital input 

signal.

• Make sure that CD/DAT DIGITAL REC in the UTIL-

ITY screen Prefer.2 page is set to ENABLE.

■

Can’t save to a library

• It is not possible to save to the factory-preset librar-

ies.

■

Can’t recall a channel library to the stereo output 
channel

• Channel libraries saved from other channels cannot 

be recalled to the stereo output channel.

■

Can’t exchange MIDI data

• Are the MIDI cables connected correctly?
• A MIDI cable may be broken.
• Is the power turned on for the transmitting and 

receiving devices?

• Do the channel settings match for the transmitted 

and receiving devices?

• Are the MIDI screen/MIDI Setup page settings set 

appropriately?

• Is a scene assigned to the program change number 

being transmitted?

■

MIDI messages are looped

• In the MIDI screen MIDI Setup page, ECHO may be 

turned ON.

• Also check the settings of the connected external 

MIDI devices.

■

MTC messages are not transmitted

• Is the MIDI cable correctly connected to the MTC 

OUT connector?

• If the cable is connected to the MIDI OUT connec-

tor, is the MTC ON/OFF setting turned ON?

• Is SYNC OUT set correctly?
• Is MTC SYNC set to MASTER?

■

The AW2816 does not synchronize to incoming 
MTC messages

• Is the MIDI cable connected to the MIDI IN con-

nector?

• In the MIDI screen MIDI Sync page, is MTC Sync 

set to SLAVE?

■

MTC messages are received, but synchronization 
drifts

• Is a large amount of MIDI data (notes etc.) being 

received together with the MTC messages?

■

MTC synchronization drifts

• Does the frame rate match between the AW2816 

and the external device?

• SYNC OFFSET may have been set.
• If jumps occur in the synchronized time, change the 

SYNC AVE. setting in the MIDI screen MIDI Sync 
page, and try again.

■

Something happens to the sound when the [DATA/
JOG] dial, [SHUTTLE] dial, [FF] key, or [REW] key 
are operated

• Differences in the number of simultaneously played 

tracks will affect the way in which the sound is 
heard when these controls are operated.

Summary of Contents for AW2816





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AW2816

IBM Personal Computer Manual To Operations preview
Personal Computer
Brand: IBM Pages: 318
Tandy Color Computer 3 Basic Quick Reference Manual preview
Color Computer 3 Basic
Brand: Tandy Pages: 17
Tandy TRS-80 Model II Service Manual preview
TRS-80 Model II
Brand: Tandy Pages: 36
Tandy 1000 MS-DOS User Manual preview
1000 MS-DOS
Brand: Tandy Pages: 337
Tandy 1000 MS-DOS Programmer'S Reference Manual preview
1000 MS-DOS
Brand: Tandy Pages: 251
Compaq st5548 - Thin Client Quick Setup Manual preview
st5548 - Thin Client
Brand: Compaq Pages: 39
ASROCK iBOX-345-DL User Manual preview
iBOX-345-DL
Brand: ASROCK Pages: 43
IBM NetVista S42 Quick Reference preview
NetVista S42
Brand: IBM Pages: 74
IWILL ZPCgx User Manual preview
ZPCgx
Brand: IWILL Pages: 72
Franklin ACE 500 User'S Reference Manual preview
ACE 500
Brand: Franklin Pages: 171
Workrite Solace Sit-to-Stand Premium Assembly/Installation Instructions preview
Solace Sit-to-Stand Premium
Brand: Workrite Pages: 2
Amico Hummingbird Lite Installation Instructions Manual preview
Hummingbird Lite
Brand: Amico Pages: 24
Asus B203 User Manual preview
B203
Brand: Asus Pages: 28
Asus Barebone System A7VT400 User Manual preview
Barebone System A7VT400
Brand: Asus Pages: 98
Asus Asteio D22 Quick Start Manual preview
Asteio D22
Brand: Asus Pages: 20
Asus B5081ZD User Manual preview
B5081ZD
Brand: Asus Pages: 44
Asus B204 User Manual preview
B204
Brand: Asus Pages: 104
Asus Barebone System T2-PH2 User Manual preview
Barebone System T2-PH2
Brand: Asus Pages: 114

Brands by name

Popular brands

Load more brands