XVision X2RN User Manual Download Page 67

Page: 67 / 116

USER MANUAL

Note

: When performing a test, your NVR will continue to work as normal. If an HDD S.M.A.R.T

error found, the HDD can be continued to use, but there will be a risk to lose recording data. It is

recommended to replace a new HDD.

5.6 System

Change general system information such as date, time and region, edit passwords and

permissions, and more.

5.6.1 General

Device Name

: Enter the desired name for your NVR. The name can include both letters and

numbers.

Device ID

: Enter the desired ID for your NVR. The device ID is used to identify the NVR, and can

only be composed of numbers. For example, 2pcs NVRs are installed in the same place, the

Device ID is 000000 for one of the NVRs, and 111111 for another NVR. When you want to operate

the NVR with a remote controller, both of the NVR may receive the signal from controller & act at

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands