XVision X2RN User Manual Download Page 64

Page: 64 / 116

USER MANUAL

If your NVR supports to install

multiple

HDDs, the

edit icon

appears in your system, you can click it

to edit the HDD as below:

Disk Type:

Read-write, read-only, and redundant.

Read-write mode is the normal status for a HDD to save recording or search recording to play.

To prevent important video data from being overwritten during cyclic recording, the HDD can be

set as

Read-only

mode. New recording will be not able to save into this read-only HDD. You can

still search recording from this read-only HDD to play.

Redundant

HDD can be used to automatically backup video footage on the recording

(read-write) hard drive. When a redundant HDD is set, the system can be set to record cameras in

parallel to both the recording hard drive and the redundant hard drive in case of hard drive failure.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands