XVision X2RN User Manual Download Page 41

Page: 41 / 116

USER MANUAL

Click

Save

to save your settings.

If you want to adjust the size of the region, click the red box in the region, the borders of the

region will be changed to red color. Long press the left button of your mouse to move the

whole region, or drag the corners to resize the region.

If you want to remove one of the regions from the camera picture, click the red box in the

region and then click

Remove

button. Click

Remove All

will delete all regions.

Notice:

1) The area for detection shall be greater than or equal to the size of the detected object, such as

the detection of a white bottle.

2) The detected object cannot be covered.

5.1.8.4 PD (Pedestrian Detection)

Pedestrian Detection function detects the moving people in a pre-defined region, and a series of

actions can be taken when the alarm is triggered.

Channel

: to select the channel you want to configure

Switch

: to enable or disable the PD function

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands