XVision X2RN User Manual Download Page 97

Page: 97 / 116

USER MANUAL

To search recordings:

1. Click

Playback

in the top-right corner of the window.

2. Select a day on the calendar to search for recordings from. Days with recordings appear with

a red underline.

3. Select the recording type to search for from the dropdown next to

Type

, or select

All

search for all recordings.

4. To choose the video stream you want to search & play. If you want to play Substream

recordings, please make sure you had set the NVR to record with Dualstream at

5.2.2.1

Record

5. Check the channels you would like to search for recordings from. Check

Synchronous

playback

to play all channels at once.

6. Click

Search

7. Recordings that fit your search will be displayed in the timeline. Click a section of video where

you would like to begin playback and click the

play button.

7.3.2.1 Playback Control Buttons

Play the recordings

Pause

Stop

Go Forward One Frame:

Move frame-by-frame through playback. Only available when the

Synchronous playback

option is not checked.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands