XVision X2RN User Manual Download Page 100

Page: 100 / 116

USER MANUAL

Chapter 8

Viewing Backed Up Video on

PC/Mac

This section will help you to play the backup files with the powerful video player which is attached

in the CD.

For Mac users, please install the app “VideoPlayer_x.x.xx_xxxx_xx_x.dmg”, for example:

VideoPlayer_1.0.15_2017_01_6.dmg.

For PC users, please install the software “VideoPlayer_x.x.xx_xxxx_xx_xx.exe”, for example:

VideoPlayer_1.0.15_2017_01_06.exe.

Minimum System Requirements

•

Intel Pentium 4 or above

•

Microsoft Windows XP / Vista / 7 / 8 / 10

•

256MB RAM

•

16MB video memory

Install the Video Player software in the CD and run.

Copy the backup files to your computer.

Click

Open File

button or click

button on the Play List to load single or multiple video files. It

supports to add & play “.rf”, “.avi”, “.mp4”, “.264” and “.265” files. Click

button to load a

folder with backed-up videos.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands