XVision X2RN User Manual Download Page 95

Page: 95 / 116

USER MANUAL

2- Live Video Stream Options:

Mainstream:

View all live videos using high-quality mainstream video settings.

Substream:

View all live videos using middle-quality substream video settings.

Mobile Stream:

View all live video using lower-quality mobile stream video settings to

conserve bandwidth. Available for IP channels only.

3- Main Menus:

Live:

View live video from cameras.

Playback:

View recorded video which is saved in NVR’s HDD.

Remote Setting:

Access functions of the NVR setting menus.

Local Settings:

Set download locations for recordings and snapshots taken using Web Client,

and choose file type for video files.

4- Information:

Hover over to see system details.

5- Exit.

6- Color Controls.

Click to display or hide the color controls.

PTZ Controls:

Click to display or hide the PTZ controls for using PTZ cameras.

PTZ Controls

Directional Arrows: Click to move the PTZ camera

Automatic line scan.

PTZ Speed: Click to set the speed of the PTZ camera’s movement.

Zoom: Click –/+ to zoom in or out.

Focus: Click –/+ to adjust focus.

Iris: Click –/+ to adjust iris.

Preset Point: Add, remove, or go to preset point.

Cruise: Start/stop PTZ cruise

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands