USER MANUAL
5.1.4 PTZ
This menu allows you to configure the PTZ (Pan-Tilt-Zoom) settings for the dome camera
Channel
:
Channel name
Signal Type:
Analog for analog channels, Analog & Digital for IP channels.
Protocol
:
Choose the communication protocol between the PTZ capable camera and NVR. If
your camera support UTC (Up the Coax) function, you can choose COAX1 or COAX2 to display
your camera OSD menu or control the UTC PTZ function.
Baudrate
:
The speed of the information sent from the NVR to the PTZ-capable camera. Make
sure it matches the compatibility level of your PTZ-capable camera.
DataBit / StopBit
:
The information between the NVR and PTZ-capable camera is sent in
individual packages. The
DataBit
indicates the number of bits sent, while the
EndBit
indicates the
end of the package and the beginning of the next (information) package. The available parameters
for
DataBit
are:
8
,
7
,
6
,
5
. the available parameters for the
StopBit
are
1
or
2
.
Parity
: For error check. See the documentation of your PTZ-capable camera, to configure this
setting.
Cruise
: Enable to use the Cruise mode. In order to use the Cruise mode, you need to set a
number of preset points.
Address
: Set the command address of the PTZ system. Please be noted that each PTZ-capable
camera needs a unique address to function properly
25
Summary of Contents for X2RN
Page 1: ......
Page 19: ...USER MANUAL 4 2 Live View Screen Overview 14 ...
Page 116: ...USER MANUAL 111 ...
