XVision X2RN User Manual Download Page 61

Page: 61 / 116

USER MANUAL

User Name

: Enter your email address.

Password

: Enter the password of your email.

Receiver 1~3

: Enter the email address where you want to receive the event notifications from the

NVR.

Interval

: Configure the length of the time interval between the notification emails from the NVR.

To make sure all settings are correct, click

Test Email

. The system sends an automated email

message to your inbox. If you received the test email, it means the configuration parameters are

correct.

5.4.3.2 Email Schedule

You need to configure the schedule to fully implement the Email notification.

The color codes on email schedule have the following meanings:

Green

: Slot for Motion detection.

Yellow

: Slot for I/O Alarm (optional).

Red

: Slot for Exception (HDD full, HDD error, or Video Loss).

Blue

: Slot for Intelligent Analysis detection.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands