XVision X2RN, User Manual

Page: 42 / 116

USER MANUAL
Buzzer : to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Level
: Small, Middle & Big. Small level is recommended to detect objects in long
distance. Big level is recommended to detect objects in short distance.
Scene
: Scene setting includes Indoor and Outdoor. Please choose the scene to
match with the place your camera installed.
Post Recording : You can set how long after an event occurs that the NVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out : If your NVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message: A letter “S” will be displayed on the screen when the intelligent detection is
triggered.
Send Email: If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen: When the detection is triggered, the channel will be enlarged into full screen.
Record Channel: to select the channel(s) you want to record when a detection is triggered.
Area: Click [ Setup ] to draw a virtual region in the camera picture.
1.
Choose one of the Rule Number. It is the number of PD area. Maximum 4 areas you can set
for PD function.
2. To enable the detection in Rule Switch .
3. Choose a Rule Type , only Normal available for this detection.
4.
Use your mouse to click 4 points in the camera picture to draw a virtual region. The shape of
the region should be a convex polygon. Concave polygon will not be able to save.
5. Click Save to save your settings.
6. If you want to adjust the size of the region, click the red box in the region, the borders of the
region will be changed to red color. Long press the left button of your mouse to move the
whole region, or drag the corners to resize the region.
7.
If you want to remove one of the regions from the camera picture, click the red box in the
37