XVision X2RN User Manual Download Page 43

Page: 43 / 116

USER MANUAL

region and then click

Remove

button. Click

Remove All

will delete all regions.

Notice:

1) The region for detection shall not be in the area that people cannot reach.

2) The detected people should be completely surrounded in the region.

5.1.8.5 FD (Face Detection)

Face Detection function detects the faces of moving people appear in a pre-defined region, and a

series of actions can be taken when the alarm is triggered.

Channel

: to select the channel you want to configure

Enable

: to enable or disable the FD function

Buzzer

: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when

the detection is triggered

Level

: Small, Middle & Big. Small level is recommended to detect objects in long

distance. Big level is recommended to detect objects in short distance.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands