XVision X2RN User Manual Download Page 56

Page: 56 / 116

USER MANUAL

Event Type

: Select the event type from below options:

No Space on Disk

: When an HDD is full.

Disk Error

: If the HDD is not detected properly.

Video Loss

: If a camera is not connected properly.

Switch

: Check the box to enable the monitoring of the event.

Buzzer

: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer,

select

OFF.

Latch Time

This is an optional function. Determine

how long the external alarm device to sound

(10s, 20s, 40s, 60s) if your NVR support to connect external alarm device.

Alarm Out

: This is an optional function. Click to enable the external alarm device to sound. This is

an optional function.

Show Message

: Check the box to display a message on the screen when No Space on Disk, Disk

Error, or Video Loss event happens.

Send Email

: Set the NVR to send you an auto-email when an event occurs.

5.4 Network

This menu allows you to configure network parameters, such as PPPoE, DHCP. The most

common types are DHCP. Most probably your network type is DHCP, unless the network is

manually addressed. If you need an authentication user name and password to the Internet, then

choose PPPoE.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands