XVision X2RN User Manual Download Page 96

Page: 96 / 116

USER MANUAL

9- Live View Control Buttons:

Open the images on Live window.

Close all the Live channels

Original Proportions: Shows live video at the original proportions

Stretch: Stretch live video to fit the full area for each channel on screen.

To enlarge the web client to full screen.

Manual Recording: Click to start manually recording for all displayed channels. Click

again to stop recording. Manual recordings are saved to your computer.

Snapshot: Click to save snapshots of all current displayed channels to your computer.

Digital Zoom: Click upon on a live image, then click-and-drag over an area of the live

image to enlarge. Right-click to return to the normal display.

Volume Control.

Volume is mute.

10- Navigation:

Shows current page number for the channels shown on screen. Use the arrow

keys to switch between pages.

11- Page View:

Click to select how many channels appear on screen at a time.

7.3.2 Playback

You can search & play recording videos stored in the HDD inside the NVR, and download the

videos to your computer.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands