XVision X2RN User Manual Download Page 98

Page: 98 / 116

USER MANUAL

Click upon one of the channels which is being played and then click record button to record

current video to your computer. Click again to stop recording.

Click upon one of the channels which is being played and then click capture button to take a

snapshot and save to your computer.

Opens the Download menu, which allows you to download several video recordings at once.

Choose the files you want to download, press

Start Download

button to begin, you will see the

download status. Press

Stop Download

button to stop.

Playback Speed.

Click to choose the playing speed.

Play All Channels:

Click to play all channels you have chosen to searched. Only available

when the

Synchronous playback

option is not checked.

Stop All Channels:

Click to stop playing all channels. Only available when the

Synchronous playback

option is not checked.

Digital Zoom: Click upon on a playing video, then click-and-drag over an area of the video to

enlarge. Right-click to return to the normal display.

Original Proportions: Shows the playing video at the original proportions

Stretch: Stretch the playing video to fit the full area for each channel on screen.

To enlarge the web client to full screen.

Summary of Contents for X2RN





















































































































Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands

XVision X2RN, User Manual

Search results

Summary of Contents for X2RN

Reviews:

Related manuals for X2RN

Brands by name

Popular brands