USER MANUAL
Scene
: Scene setting includes Indoor and Outdoor. Please choose the scene to
match with the place your camera installed.
Post Recording
: You can set how long after an event occurs that the NVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out
: If your NVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message
:
A letter “S” will be displayed on the screen when the intelligent detection is
triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
Area:
Click [
Setup
] to draw a virtual region in the camera picture.
1.
Choose one of the Rule Number. It is the number of FD area. Maximum 4 areas you can set
for FD function.
2.
To enable the detection in
Rule Switch
.
3.
Choose a
Rule Type
, only Normal available for this detection.
4.
Use your mouse to click 4 points in the camera picture to draw a virtual region. The shape of
the region should be a convex polygon. Concave polygon will not be able to save.
5.
Click
Save
to save your settings.
6.
If you want to adjust the size of the region, click the red box in the region, the borders of the
region will be changed to red color. Long press the left button of your mouse to move the
whole region, or drag the corners to resize the region.
7.
If you want to remove one of the regions from the camera picture, click the red box in the
region and then click
Remove
button. Click
Remove All
will delete all regions.
Notice:
1) The region for detection shall not be in the area that people cannot reach.
2) The region should include the complete front face.
39
Summary of Contents for X2RN
Page 1: ......
Page 19: ...USER MANUAL 4 2 Live View Screen Overview 14 ...
Page 116: ...USER MANUAL 111 ...
