XtendLan XL-HDVR series, User Manual

Page: 70 / 106

70
Navigating PTZ Menus
PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain PTZ
settings, right clicking with the mouse in a display while in PTZ control mode will bring up the PTZ settings menu.
This menu is shown in Figure 1.
Figure 1. Mouse PTZ Settings Menu
The items that can be found on this menu include:
• Camera:
Select a PTZ camera.
• Call Preset:
Call a PTZ preset.
• Call Patrol:
Call a PTZ sequence.
• Call Pattern:
Call a PTZ pattern.
• Patrol Setting:
Enter PTZ sequence configuration menu.
• Pattern Setting:
Enter PTZ pattern configuration menu.
• PTZ Setting:
Enter PTZ setting menu.
Configuring PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the PTZ and
RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Settings menu by clicking Menu > Setting > PTZ. The PTZ Settings menu is shown in
Figure 2.