XtendLan XL-HDVR series User Manual Download Page 27

Page: 27 / 106

Figure 3. Digital Zoom

Using an Aux Monitor

Certain features of the Live Preview are also available while using an Aux monitor. These features include:

• Single Camera:

Switch to a full screen display of the selected camera. Camera can be selected from a

drop down list.

• Multi-Camera:

Switch between different display layout options. Layout options can be selected from a

drop down list.

• Next Screen:

When displaying less than the maximum number of cameras in Live Preview, clicking this

feature will switch to the next set of displays.

• Playback:

Enter into Playback mode.

• PTZ:

Enter PTZ Control mode.

• Main Monitor:

Enter Main operation mode.

Figure 4. Aux Monitor Mouse Menu

Note:

Main menu operation’s not available while in Aux monitor mode.

Configuring Live Preview Displays

Live Preview displays can be customized to your own needs. These settings can be accessed by entering the Display
Settings menu.

Summary of Contents for XL-HDVR series











































































































Search results

Summary of Contents for XL-HDVR series

Reviews:

Related manuals for XL-HDVR series

Brands by name

Popular brands

XtendLan XL-HDVR series, User Manual

Search results

Summary of Contents for XL-HDVR series

Reviews:

Related manuals for XL-HDVR series

Brands by name

Popular brands