XtendLan XL-HDVR series, User Manual

Page: 67 / 106

67
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Set Multicast IP , as shown in Figure 10. When adding a device to the Network Video Surveillance
software, the multicast address must be the same as the DVR’s multicast IP.
Figure 10. Host/Others Menu
5.
Click OK to save and exit menu.
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings
menu. The default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4.
Enter new Server Port and HTTP Port , as shown in Figure 11.
Figure 11. Host/Others Menu