U s i n g t h e P r i n t e r w i t h U N I X T C P / I P
5-8
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
Automatic
Installation
Procedure
Automatic installation is performed by a program called
Enstall
.
The user-friendly
Enstall
program automatically:
Installs the required files on your UNIX system,
Allows you to enter an IP address for your XNIC, if the XNIC
does not already have one, and
Configures the print queues on the host for network printing.
Enstall
supports installation of pre-compiled host utilities for the
following UNIX systems making the installation quicker and less
sensitive to system variations:
AT&T SYSTEM V releases 3.2 and 4.0
IBM AIX release 4.1
SCO UNIX release 3.2
SOLARIS releases 2.2, and 2.3
SunOS releases 4.0, 4.1, 4.1.1, and 4.1.3.
If your system is not listed above, the system is required to have a
C compiler to enable
Enstall
to compile the
RPRINT.C
and
TELRCF.C
files also included on the
UNIX Installation Utility
diskette.
Note
Enstall will not work if the printer and the workstation on
which Enstall is running are on different network segments.
A minimum of five to ten megabytes of disk space is required
on the UNIX system to accommodate the Enstall software and
spool queues.
Caution
If you are unsure of whether or not your UNIX host is 100%
hardware and software compatible with the supplied
pre-compiled host utilities, you should compile the utilities
on your host.
Etr-ch05 Page 8 Thursday, October 24, 1996 7:31 PM
