U s i n g t h e P r i n t e r w i t h U N I X T C P / I P
5-12
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
Manual
Installation
Procedure
If you wish to install the Xerox printer manually, you must assign
the IP address, configure some system files, and then configure
the print queue.
Assigning the IP address is easiest if you have the BootP
(Bootstrap Protocol), DHCP (Dynamic Host Configuration
Protocol), or RARP (Reverse Address Resolution Protocol) daemon
running on your network.
You may also use the standard UNIX ARP command to assign the
IP address. Figure 5.1 shows the options for manual installation.
Etr-ch05 Page 12 Thursday, October 24, 1996 7:31 PM
