C o n f i g u r i n g t h e X N I C a s a P r i n t S e r v e r ( N e t W a r e 2 . x / 3 . x )
C h a p t e r 3 : U s i n g t h e P r i n t e r w i t h N o v e l l N e t W a r e
❖
3-11
Assigning the
Print Queue
1
Select
Print Server Information
from the
Available
Options
menu.
2
Select the print server from the list.
3
Select
Print Server Configuration
from the menu.
4
Select
Queues Serviced by Printer
from the
Print Server
Configuration
menu.
5
Select the Xerox printer name.
For example,
XNE1076E3_1
.
6
Press
< I n s e r t >
to display the list of available queues.
Select the queue to be serviced by the Xerox printer.
7
Enter a Priority level number for the printer (default is 1,
highest) and press
< E n t e r >
.
8
If you wish to service several queues with the Xerox printer,
repeat Steps 6 and 7 for each additional queue.
9
Press
< E s c >
several times until the
Available Options
menu is displayed.
Note
If your network has more than 25 file servers, before
continuing to the next section Restarting the XNIC, it is
recommended to configure the XNIC. Refer to 4. Setting
Required / Preferred File Server Name (Recommended for
Large Networks) (page 3-45).
Setting the file server name on the XNIC will automatically
reset the XNIC. Therefore, you can skip the next section
Restarting the XNIC and proceed on.
ETR-CH03 Page 11 Wednesday, October 23, 1996 6:46 PM
