N o v e l l N e t W a r e P r o b l e m s
11-12
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
Jobs sent by Microsoft
Windows applications are
not re-routed from LPT1
to the network printer
after the NetWare
Capture command is run.
Fast Printing Direct to Port is
selected under the Control Panel
options in Windows, causing the
application to drive LPT1 directly.
De-select fast printing. The path under
Windows is:
Main
Control Panel
Printers
Connect
Remove the X from the Fast Printing
Direct to Port box.
No communication
between XNIC and the
intended file server.
Mismatch of frame types between
XNIC and the file server.
Sometimes, when XNIC is left to
automatically set its frame type, it may lock
its frame type to an undesired setting.
Because of this, it is recommended that you
force the XNIC to have a permanently set
frame type.
Also, If the XNIC will need to be connected
to Novell file servers that have different
frame types, it is recommended that the
Novell file servers include the bind and
load commands. It is the file servers task
to receive and transmit with more than just
one frame type.
Table 11.2 Novell NetWare problems
(continued)
Problem
Possible Causes
Corrective Actions
ETR-CH11 Page 12 Thursday, October 24, 1996 7:14 AM
