C o n n e c t i n g X N I C - E N E T t o t h e N e t w o r k
2-4
❖
X N I C - E N E T T / T R I N G C o n f i g u r a t i o n G u i d e
Thinnet (10base2)
Connection
1
If you are patching into the middle of the
cable, use a BNC T-adapter to connect to
the Ethernet cable.
2
If you are connecting to the end of a cable
segment, connect the Ethernet cable to
one side of the BNC T-adapter and
connect a 50 Ohm Ethernet terminator to
the other side.
3
Attach the BNC T-adapter to the BNC
port on the XNIC-ENET.
Do not attach anything to the port
marked UTP.
Etr-ch02 Page 4 Thursday, October 24, 1996 4:49 PM
