B a s i c X N I C C o m m a n d s
5-38
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
CHANGE
is a combination of
SET
and
DEFINE
; it
immediately changes a parameter and permanently updates
it in the NVRAM as well. The syntax is:
c h a n g e
parameter value
HELP
displays instructions on the use of the various
commands. The syntax is:
h e l p
commandname
In XNIC, Version 5.x, the Help command is not available.
Refer to the table which begins on the next page for information
about commands.
Etr-ch05 Page 38 Thursday, October 24, 1996 7:31 PM
