Xerox WorkCentre Pro 765, System Administrator Manual

Page: 68 / 368

Programming the Machine
2-48 WorkCentre Pro 665/685/765/785
Power Saver Setting
The Power Saver function allows you to turn the power off to save
power consumption. If the Power Saver function is On, a warm up
period is needed before printing occurs. There are two Power Save
modes with this machine, Super Power Save and Printer Power
Save.
•
Super Power Save - Turns all the power off to minimize power
consumption. Select one of three modes, Automatic, Manual or
Off:
Automatic mode: Enters the Power Saver Mode automatically
when in the Standby Mode for the pre-set time
period.
Manual Mode: Enters the Power Saver Mode when the Power
Save key on the control panel is pressed. If the
machine is in the Standby Mode when the
Power Save key is pressed, it enters the
Power Saver Mode immediately. If the Power
Save key is pressed while the machine is not in
the Standby Mode, it enters the Power Saver
Mode after returning to the Standby Mode.
Off: Disables the Super Power Saver mode and the
Printer Power Saver mode button on the
control panel.
1. Press:
2. Select the Super Power Save mode:
To select the Automatic mode, press . Then, go to Step 3.
To select the Manual mode, press . Then, go to Step 4.
To select Off, press . Then, go to Step 4.
*** Menu item numbers may vary according to configurations.
Menu
***
Super power save
1. Automatic
2. Manual
3. Off