Xerox WorkCentre Pro 765, System Administrator Manual

Page: 124 / 368

Transmitting Documents
5-10 WorkCentre Pro 665/685/765/785
Line Selection
The Line Selection key allows you to select the line you want the
WorkCentre to use when performing the current communication. The
Line Selection can also be designated when setting Speed Dial or
One Touch numbers for a remote party that requires this selection
every time. (Refer to Chapter 2, “Setting up the Phonebook”.)
To manually select the line for the current job:
1. Load the document face down in the Document Tray.
2. If desired, select the Resolution and Contrast.
3. Press:
4. Select the line to be used for this job:
To select either line, press .
To select Line 1, press .
To select Line 2, press .
5. Using one of the dialing methods, enter the fax number and press
Enter.
The document is scanned and sent using the line you selected.
Note: You may select another option for this job. Refer to the
selected option for the procedure.
Line
Select
Line selection
1. Either line
2. Line #1
3. Line #2
Free memory: 100%
Enter fax number