Xerox WorkCentre Pro 765 System Administrator Manual Download Page 298

Page: 298 / 368

B-8

WorkCentre Pro 665/685/765/785

11. Align the four hooks on the new Toner Cartridge with the slots on

the Developer Assembly. Fit the cartridge to the assembly. The
following figure shows how the Toner Cartridge and the
Developer Assembly connect.

12. Move the cartridge to the right until the button on the left of the

Developer Assembly clicks into place.

13. Holding the Developer Assembly with one hand, grasp the edge

of the protective strip under the toner housing. Pull the Strip firmly
to completely remove it from the cartridge.

Toner Cartridge

Developer

096

Assembly

Strip

Developer

025

Assembly

Summary of Contents for WorkCentre Pro 765

















































































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands

Xerox WorkCentre Pro 765, System Administrator Manual

Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands