Xerox WorkCentre Pro 765 System Administrator Manual Download Page 206

Page: 206 / 368

Reports

9-12

WorkCentre Pro 665/685/765/785

The following information is printed on the Relay Originator
Confirmation Report:

Relay Originator Report

To set the Relay Originator Report automatic print status.

Press:

*** Menu item numbers may vary according to configurations.

Item

Description

Job number

Job Number of transmission.

Date

Date and time that the job was accepted.

Document
pages

Number of pages.

Start time

Time when the transmission started.

End time
(Resend until)

Time when the transmission ended (the time when a
Resend Stored Fax transmission is designated).

Successful

List of Speed Dial or Group numbers where the
transmission was sent.

Unsuccessful

List of Speed Dial or Group numbers where an error
occurred.

Sent Pages - The number of pages sent.

Menu

***

Relay originator
1. Always
2. On error
3. Off

Summary of Contents for WorkCentre Pro 765

















































































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands

Xerox WorkCentre Pro 765, System Administrator Manual

Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands