Xerox WorkCentre Pro 765, System Administrator Manual

Page: 125 / 368

Transmitting Documents
WorkCentre Pro 665/685/765/785 5-11
Charge Codes
The Charge Code function key is used to enter a charge code in a
telephone number.
Charge codes can be entered manually during Keypad dialing or
stored in the Speed Dial and One Touch numbers for dialing numbers
that always require this feature. (Refer to the Chapter 2, “Setting up
the Phonebook”.)
To enter a Charge Code when sending a document:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast.
3. Using the Numeric Keypad, manually enter the fax number.
4. Press:
5. The WorkCentre places a “+” in the phone number to indicate that
a Charge Code is to follow.
6. Enter the Charge Code.
The Charge Code is entered and hidden with “$” symbols displayed in
place of the code.
7. Press
Enter to start the job.
Charge
Code
Fax number (128 max):
5
Fax number (128 max):
5 $$$