Xerox WorkCentre Pro 765 System Administrator Manual Download Page 123

Page: 123 / 368

Transmitting Documents

WorkCentre Pro 665/685/765/785

5-9

Priority Transmission

Use this procedure to send a document immediately, even when
other jobs are reserved in memory.

To Priority Send a document:

Load the document face down in the Document Tray.

Select the desired

Resolution and Contrast.

Press:

Using one of the dialing methods, enter the remote fax number,
then press

Enter, if needed.

The document is transmitted immediately or immediately
following the operation in process.

Note:

Only one transmission can be Priority Reserved.

Note:

You can select another option for this job. Refer to the
selected option for the procedure.

Priority

Priority fax
Enter fax number,
or press Phonebook
key or one touch key

Summary of Contents for WorkCentre Pro 765

















































































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands

Xerox WorkCentre Pro 765, System Administrator Manual

Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands