Xerox WorkCentre Pro 765, System Administrator Manual

Page: 40 / 368

Programming the Machine
2-20 WorkCentre Pro 665/685/765/785
Line Selection**
23. To select either line, press .
To select Line #1, press .
To select Line #2, press .
24. To add an additional option, go to step 8. To exit, press and
go to step 25 to complete the procedure.
25. To link this Speed Dial Number to a One Touch key, press the
desired
One Touch Key; or to skip this step, press Enter .
26. To assign additional Speed Dial numbers, repeat steps 2-26.
27. When you have completed the Speed Dial assignment, press
Exit or Stop to return to the Standby Mode.
** Not available on some models.
Note: If you select an assigned One Touch number, you have the
option of deleting or retaining the information previously
stored.
Speed dial: 001
Press one touch key
to enter or
ENTER to skip