Xerox WorkCentre Pro 765, System Administrator Manual

Page: 212 / 368

Reports
9-18 WorkCentre Pro 665/685/765/785
Confirmation Report Override
A Confirmation Report can be printed automatically for each
communication job by setting the default report print option (see the
previous section, “Confirmation Report Setup”).
When you set the report print status using the
Confirmation Function
Key, the setting you select is active for the current job only.
The Communication Report print status can also be set when
assigning Speed Dial and One Touch numbers, if communication with
a certain remote party always requires the option (see Chapter 2,
“Setting up the Phonebook”).
To set the Confirmation Report print status for this job:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast.
3. Press:
4. Select the report print status:
To automatically print a report when the transmission occurs,
press .
To print a report only if an error occurs, press .
To select not to print a confirmation report for this transmission,
press .
5. Using one of the dialing methods, enter the phone number and
press
Enter, if necessary.
The document is sent and, if selected, a report is printed.
Confirm.
Confirmation report
1. Always
2. On error
3. Off
Free memory: 100%
Enter fax number