Xerox WorkCentre Pro 765 System Administrator Manual Download Page 66

Page: 66 / 368

Programming the Machine

2-46

WorkCentre Pro 665/685/765/785

Resolution and Contrast Setting

The default settings can be changed during a transmit or copy
operation by pressing the

Contrast and Resolution keys on the

Control Panel.

The following tables define the available default Contrast and
Resolution settings:

Resolution
selection

Description

Standard

Use for sending normal text and graphics.

Selected when Resolution LED is off.

Fine

Use for documents with small characters
(newspaper print, etc.).

Superfine

Use for documents containing very detailed print.

Contrast selection

Description

Normal

Use for documents printed with ordinary image
density.

Selected when the Contrast LED is off.

Lighten

Use for documents with dark print that need to be
adjusted to print lighter.

Darken

Use for documents with light or faint print that need
to be adjusted to print darker.

Summary of Contents for WorkCentre Pro 765

















































































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands

Xerox WorkCentre Pro 765, System Administrator Manual

Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands