Xerox WorkCentre Pro 765 System Administrator Manual Download Page 143

Page: 143 / 368

Transmitting Documents

WorkCentre Pro 665/685/765/785

5-29

Transmitting Using a Department Code

When the Department Code option is set, the “Enter Dept. code”
screen is displayed.

To set or change Department Codes, refer to Chapter 2, “Changing
Department Codes”.

To use the machine:

Enter the 5-digit Department Code, then press

Enter.

The standby mode screen displays.

If no activity is performed within 1 minute after entering the
Department Code, the display returns to the “Enter Dept. code”
screen.

12-01-1999 13:47

Free memory

100%

Enter dept. code

Summary of Contents for WorkCentre Pro 765

















































































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands

Xerox WorkCentre Pro 765, System Administrator Manual

Search results

Summary of Contents for WorkCentre Pro 765

Reviews:

Related manuals for WorkCentre Pro 765

Brands by name

Popular brands