Xerox WorkCentre 5230A, System Administration Manual, Page: 420 / 454

15 Problem Solving
420
033-721 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-722 The scan job was cancelled. The document is jammed inside the machine, or
the number of scanned pages has reached the limit value. If the problem is a
document jam, clear the jam first. Reload only the document pages that have
not been scanned, and press the <Start> button to continue the job.
033-724 Unable to receive the image data, because the data size that can be received
per a fax transmission exceeds its upper limit. Request the sender to divide the
document into smaller segments to send, or lower the resolution. If the problem
persists, check if memory is installed correctly. If the problem persists, contact
the Xerox Welcome Center.
033-725 The hard disk is full. Delete unnecessary data on the hard disk to increase the
available hard disk space.
033-726 The received document was printed single sided. The 2-sided printing feature is
not available for a mixed size document.
033-727 The orientation of the received pages could not be changed, because the data
size was too large. They were printed without rotation.
033-728 The Auto Print formatting of the received fax document was interrupted by a
manual print operation. No user action is required. The machine will
automatically resume the Auto Print job after the manual printing is done.
033-731 The Auto Print processing for the received fax document was interrupted by a
manual print operation. No user action is required.
033-733 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-734 Fax printing was suspended, because a job report was generated while the fax
print job was being prepared. No user action is required.
033-735 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-736 The transmission was cancelled, because the data size exceeded its upper limit.
033-737 A fax error occurred. Perform the same operation again.
033-738 Abnormal JBIG image data was received. No user action is required.
033-740 The print job for the received fax document was cancelled. No user action is
required.
033-741
033-742 A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
033-743
033-744
033-745
033-746 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-747 The job was suspended. No user action is required.
033-749 The machine rectified a memory problem automatically for printout. No user
action is required.
033-750 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
Code Description and Remedy