Xerox WorkCentre 5230A, System Administration Manual

Page: 393 / 454

Fault Codes
393
016-454 Unable to retrieve the IP address from DNS. Check the DNS configuration and
IP address retrieve setting.
016-455 Connection to the SNTP server was timed out. Check the network cable
connection and the IP address of the SNTP server.
016-456 Received a message from the SNTP server saying that it was not synchronized
with the standard time source. Check the SNTP server settings.
016-500
016-501
016-502 An error occurred during data write processing. Contact the Xerox Welcome
Center.
016-503 Unable to resolve the name of the SMTP server when e-mail was transmitted.
Check if the SMTP server is set correctly using CentreWare Internet Services.
Also, check that the DNS server is set correctly.
016-504 Unable to resolve the name of the POP3 server when e-mail was transmitted.
Check if the POP3 server is set correctly using CentreWare Internet Services.
Also, check that the DNS server is set correctly.
016-505 Unable to log in to the POP3 server when transmitting e-mail. Check if the user
name and password used for the POP3 server are set correctly using
CentreWare Internet Services.
016-513 An SMTP server connection timeout error occurred. The SMTP server or
network is overloaded. Wait for a while, and try again.
016-514 An XPS error occurred. Use a print driver on XPS Viewer to submit a print job.
016-515 The memory space for XPS data is not sufficient. Change the print mode to a
higher processing mode. If the problem persists, add memory. If the problem still
persists, use a print driver on XPS Viewer to submit a print job.
016-516 An XPS print ticket error occurred. Check if you used the correct print steps on
your application. If the problem persists, contact the application vender.
016-518 A PostScript error occurred. Disable either the booklet-creation or Watermark
feature.
016-519 The print volume reached the limit. If necessary, change the limit of print
volume.
016-522 An LDAP server SSL authentication error occurred. An SSL client certificate
could not be acquired. The LDAP server requires an SSL client certificate. Set
the SSL client certificate on the machine.
016-523 An LDAP server SSL authentication error occurred. The LDAP server’s SSL
certificate is not trusted. Register the root certificate of the LDAP server SSL
certificate on the machine.
016-524 An LDAP server SSL authentication error occurred. The server certificate will
expire soon. Change to a valid LDAP server SSL certificate, or set [LDAP -
SSL/TLS Communication] under [SSL/TLS Settings] to [Disabled] to avoid the
error.
016-525 An LDAP server SSL authentication error occurred. The server certificate has
expired. Change to a valid LDAP server SSL certificate, or set [LDAP - SSL/TLS
Communication] under [SSL/TLS Settings] to [Disabled] to avoid the error.
Code Description and Remedy