Xerox WorkCentre 5230A, System Administration Manual

Page: 35 / 454

Loading Staples in the Office Finisher LX (Optional)
35
6.
Return the staple cartridge to
its original position
7.
Close the front cover of the finisher.
NOTE: If the front cover is not completely closed, a message will appear and the
machine will not operate.
Loading Staples in the Office Finisher LX (Optional)
The Office Finisher LX contains an automatic stapler. When the finisher runs out of
staples, a message appears on the touch screen. When this message is displayed,
load a new staple case into the staple cartridge.
1.
Make sure that the machine is
not operating, and open the
front cover of the finisher.
2.
Hold the staple cartridge by the
lever R1 and pull it to the right.
3.
Hold the staple cartridge by the
orange lever and remove it
from the finisher.
NOTE: The staple cartridge is
firmly inserted. A slight force is
required to pull the cartridge out of
the finisher.
Lever R1
Orange Lever