Xerox WorkCentre 5230A, System Administration Manual

Page: 342 / 454

14 Authentication and Account Administration
342
6.
Enter the domain in the [Domain Name] box. For example: example.com
7.
Enter details for up to four alternate servers and backups, if required.
8.
Click [Apply].
Configuring Remote Authentication for SMB
At Your Workstation:
1.
Click the [Properties] tab.
2.
Expand the [Security] folder, and then the [Remote Authentication Servers] folder.
3.
Click [SMB Server].
4.
From the [SMB Server Setup] drop-down menu, select your desired method.
5.
Enter the domain name (up to 64 characters) in the [Domain Name] box. This
setting is mandatory.
6.
Enter the IP Address of the domain controller in the [Server Name/IP Address]
box (if [By Domain Name and Server Address / IP Address] was selected for
[SMB Server Setup]).
7.
Repeat steps 7 and 8 for the configuration of up to four additional backup domain
controllers, if applicable.
8.
Click [Apply].
Configuring Remote Authentication for LDAP
Refer to your LDAP server documentation for the full range of information that can be
entered into this LDAP dialog to fully support both e-mail applications and
authentication using your LDAP server.
The path to the LDAP dialog is as follows:
At Your Workstation:
1.
Click the [Properties] tab.
2.
Expand the [Connectivity] folder, the [Protocols] folder, and then the [LDAP] folder.
3.
Click [LDAP Server].
4.
Under [Server Information], enter the IP address (or host name) in the box
supplied.
NOTE: If entering a fully qualified host name (for example, ldapserver.xerox.com),
make sure that the specified domain name matches the machine’s TCP/IP
configuration (domain name shown under DNS on the machine’s Configuration
Report).
5.
Enter the port number (default of 389).
6.
If available, decide whether or not to use encryption (Authentication with SSL)
when accessing the LDAP server.
7.
Specify the LDAP server environment from the [LDAP Server] drop-down list.
8.
If required, enter the path to the LDAP objects to limit the LDAP search in the
[Search Directory Root] field. The entry should be in base DN format (for instance,
ou=people, dc=xerox, dc=com).