Xerox WorkCentre 4260 Series User Manual Download Page 65

Page: 65 / 232

Copy

Xerox WorkCentre 4260 User Guide

NOTE:

Originals must be loaded in the document feeder when using this feature.

1 Page Up:

Copies an original onto one sheet of paper.

2 Pages Up:

Copies two separate originals onto one sheet of paper.

4 Pages Up:

Copies four separate originals onto one sheet of paper.

NOTE:

For landscape originals, place the top of the document at the back of the

feeder. For portrait originals, place the top of the document to the left.

Store Job

Use this feature to store files and job settings.

Off:

The feature is switched off.

Copy & Store:

Use this option to copy the original documents and store in the

device memory for retrieval later.

Store Only:

Store the originals in the device memory for retrieval later. No hard

copy output is produced.

Summary of Contents for WorkCentre 4260 Series









































































































































































































































Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands

Xerox WorkCentre 4260 Series, User Manual

Search results

Summary of Contents for WorkCentre 4260 Series

Reviews:

Related manuals for WorkCentre 4260 Series

Brands by name

Popular brands