Xerox WorkCentre 4260 Series, User Manual

Page: 197 / 232

11 Setups
Xerox WorkCentre 4260 User Guide 189
of copy, print, fax and scan jobs that a user can perform. System Administrators
can print a report which contains all XSA data.
XSA is set up via CentreWare Internet Services, the machine's embedded web
browser. System Administrators create accounts and specify limits before users are
authorized to access the machine.
XSA is standard on the device and requires no additional software.
When XSA is set up, users must enter their account IDs at the machine to use the
device and access the features. When they have finished their job, their XSA
allocation is reduced by the number of prints, copies or scans performed.
Steps on how to access the machine using Xerox Standard Accounting
At the Machine
1.
Press the <Services Home> button on the Control Panel.
2.
The Xerox Standard Accounting Login [User ID] screen will show. Enter your
XSA User ID .
3.
Touch [Enter] .
4.
The [Validation in Progress] screen will display.
5.
If you are a member of more than one group, touch [Login to a General
Account] or [Login to a Group Account] and select the required account.
6.
Touch [Enter] .
7.
When the User is logged in, the
[Services]
screen will show. The User can now
select the feature that they want to use.
8.
To log out, or to log in to another group or General Account, touch
[Username]
in the top right of the touch screen.
9.
Press the <Log In/Out> button
10.
Touch [Confirm] to exit the Tools Pathway.
The XSA feature is mutually exclusive from any other accounting feature. If XSA is
enabled at the device, you cannot enable Foreign Device Interface or Network
Accounting.
For more information about this feature, consult the System Administrator Guide ,
or contact your System Administrator.
Foreign Device Interface
The Xerox Foreign Device Interface (FDI) is an interface to third-party access
control devices, coin machines and card readers. These can be added to charge for
usage. Copy and print services can be set to charge at the foreign device.
Print Job Control enables charging for print jobs. Print jobs sent when it is enabled
will be held in the job queue and can be manually released when credits are
available at the foreign device.
The services available at the machine can be set using Inhibit Services. Choosing
Copy Only will require credits at the foreign device for copying but allow access to